Phiddipus Project

We just got back from Spring break and we were hard at work over the break. I took all the aluminum I cut for mine home and put it through my dads drill press to drill all the holes. I also used a miter box with a powerful reciprocating saw to cut my angles. Once I was finished with all that I went ahead and practiced some brazing on aluminum scraps laying around before I did anything of consequence with the actual parts. https://drive.google.com/file/d/14qkvykVJF-rbIbbkNks-_KykeEHA0vE4/view?usp=sharing

We have officially finished cutting all our parts up into the sizes we need. We are now drawing each part so we can begin to drill the holes and maybe even bolt it together. https://drive.google.com/file/d/14qkvykVJF-rbIbbkNks-_KykeEHA0vE4/view?usp=sharing

Our parts just came in and we are going over it to see if anything is missing. We have to make a cut list before we can begin to cut our parts. Once we cut the parts we will set everything up to drill our holes and maybe even begin to bolt it all together. We are also making an updated version of are budget since we realized we could make our lives easier by buying pre-cut material.

We're waiting on the parts to show up and we are going over how exactly we will manufacture the parts we need once our materials arrive.